CentOS 7.0安装配置LAMP服务器(Apache+PHP+MariaDB)

准备篇

CentOS 7.0系统安装配置图解教程

http://www.osyunwei.com/archives/7829.html

1、配置防火墙,开启80端口、3306端口

CentOS 7.0默认使用的是firewall作为防火墙,这里改为iptables防火墙。

  • 关闭firewall:
systemctl stop firewalld.service #停止firewall

systemctl disable firewalld.service #禁止firewall开机启动
  • 安装iptables防火墙
yum install iptables-services #安装

vi /etc/sysconfig/iptables #编辑防火墙配置文件

# Firewall configuration written by system-config-firewall

# Manual customization of this file is not recommended.

*filter

:INPUT ACCEPT [0:0]

:FORWARD ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

-A INPUT -p icmp -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT

-A INPUT -j REJECT --reject-with icmp-host-prohibited

-A FORWARD -j REJECT --reject-with icmp-host-prohibited

COMMIT

:wq! #保存退出

systemctl restart iptables.service #最后重启防火墙使配置生效

systemctl enable iptables.service #设置防火墙开机启动

2、关闭SELINUX

vi /etc/selinux/config

#SELINUX=enforcing #注释掉

#SELINUXTYPE=targeted #注释掉

SELINUX=disabled #增加

:wq! #保存退出

setenforce 0 #使配置立即生效

安装篇

1、安装Apache

yum install httpd #根据提示,输入Y安装即可成功安装

systemctl start httpd.service #启动apache

systemctl stop httpd.service #停止apache

systemctl restart httpd.service #重启apache

systemctl enable httpd.service #设置apache开机启动

在客户端浏览器中打开服务器IP地址,会出现下面的界面,说明apache安装成功

2、安装MariaDB

CentOS 7.0中,已经使用MariaDB替代了MySQL数据库

  • 安装MariaDB

yum install mariadb mariadb-server #询问是否要安装,输入Y即可自动安装,直到安装完成

systemctl start mariadb.service #启动MariaDB

systemctl stop mariadb.service #停止MariaDB

systemctl restart mariadb.service #重启MariaDB

systemctl enable mariadb.service #设置开机启动

cp /usr/share/mysql/my-huge.cnf /etc/my.cnf #拷贝配置文件(注意:如果/etc目录下面默认有一个my.cnf,直接覆盖即可)
  • 为root账户设置密码

mysql_secure_installation

回车,根据提示输入Y

输入2次密码,回车

根据提示一路输入Y

最后出现:Thanks for using MySQL!

MariaDB密码设置完成,重新启动 MariaDB:

systemctl restart mariadb.service #重启MariaDB

3、安装PHP

  • 安装PHP

yum install php #根据提示输入Y直到安装完成
  • 安装PHP组件,使PHP支持 MariaDB
yum install php-mysql php-gd libjpeg* php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-bcmath php-mhash

#这里选择以上安装包进行安装,根据提示输入Y回车

systemctl restart mariadb.service #重启MariaDB

systemctl restart httpd.service #重启apache

配置篇

1、Apache配置

vi /etc/httpd/conf/httpd.conf #编辑文件

ServerSignature On  #添加,在错误页中显示Apache的版本,Off为不显示

Options Indexes FollowSymLinks  #修改为:Options Includes ExecCGI FollowSymLinks(允许服务器执行CGI及SSI,禁止列出目录)

#AddHandler cgi-script .cgi #修改为:AddHandler cgi-script .cgi .pl (允许扩展名为.pl的CGI脚本运行)

AllowOverride None  #修改为:AllowOverride All (允许.htaccess)

AddDefaultCharset UTF-8 #修改为:AddDefaultCharset GB2312 (添加GB2312为默认编码)

#Options Indexes FollowSymLinks   #修改为 Options FollowSymLinks(不在浏览器上显示树状目录结构)

DirectoryIndex index.html   #修改为:DirectoryIndex index.html index.htm Default.html Default.htm index.php(设置默认首页文件,增加index.php)

MaxKeepAliveRequests 500  #添加MaxKeepAliveRequests 500 (增加同时连接数)

:wq! #保存退出

systemctl restart httpd.service #重启apache

rm -f /etc/httpd/conf.d/welcome.conf /var/www/error/noindex.html #删除默认测试页

2、php配置

vi /etc/php.ini #编辑

date.timezone = PRC #把前面的分号去掉,改为date.timezone = PRC

disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen,disk_free_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk_total_space,posix_ctermid,posix_get_last_error,posix_getcwd, posix_getegid,posix_geteuid,posix_getgid, posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp,posix_getpid, posix_getppid,posix_getpwnam,posix_getpwuid, posix_getrlimit, posix_getsid,posix_getuid,posix_isatty, posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid, posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname

#列出PHP可以禁用的函数,如果某些程序需要用到这个函数,可以删除,取消禁用。

expose_php = Off #禁止显示php版本的信息

short_open_tag = ON #支持php短标签

open_basedir = .:/tmp/  #设置表示允许访问当前目录(即PHP脚本文件所在之目录)和/tmp/目录,可以防止php木马跨站,如果改了之后安装程序有问题(例如:织梦内容管理系统),可以注销此行,或者直接写上程序的目录/data/www.osyunwei.com/:/tmp/

:wq! #保存退出

systemctl restart mariadb.service #重启MariaDB

systemctl restart httpd.service #重启apache

测试篇

cd /var/www/html

vi index.php #输入下面内容

<?php

phpinfo();

?>

:wq! #保存退出

在客户端浏览器输入服务器IP地址,可以看到如下图所示相关的配置信息!

注意:apache默认的程序目录是/var/www/html

权限设置:chown apache.apache -R /var/www/html

至此,CentOS 7.0安装配置LAMP服务器(Apache+PHP+MariaDB)教程完成!

标签:MariaDBCentosPHPApache 发布于:2019-10-01 07:09:44